# Mqxlz's from MemoQ 9.7.10 do not load

**URL:** https://forum.xbench.net/t/mqxlzs-from-memoq-9-7-10-do-not-load/799
**Category:** Technical Support
**Created:** [May 28, 2021, 5:26am UTC](https://forum.xbench.net/t/mqxlzs-from-memoq-9-7-10-do-not-load/799 "2021-05-28T05:26:02Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![trad](https://avatars.discourse-cdn.com/v4/letter/t/df705f/32.png) [@trad](https://forum.xbench.net/u/trad)
#### Post date: [May 28, 2021, 5:26am UTC](https://forum.xbench.net/t/mqxlzs-from-memoq-9-7-10-do-not-load/799/1 "2021-05-28T05:26:02Z")

</div>

Hi everyone,

I can’t load any mqxlz file generated by MemoQ 9.7.10 on XBench.  
The program says that it’s due to “duplicate source”.

I’ve read that there was a similar issue when MemoQ 9.5 was released.

Could you please adapt Xbench accordingly, if that’s the case?

Thanks in advance

---

<div class="post-metadata">

### Author: ![omartin](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/omartin/32/82_2.png) [@omartin](https://forum.xbench.net/u/omartin)
#### Post date: [May 28, 2021, 6:46am UTC](https://forum.xbench.net/t/mqxlzs-from-memoq-9-7-10-do-not-load/799/2 "2021-05-28T06:46:48Z")

</div>

Hi Andrea,

You need to download and install Xbench 3.0 build 1520 from the Download page ([Download](https://www.xbench.net/index.php/download)).

---

<div class="post-metadata">

### Author: ![trad](https://avatars.discourse-cdn.com/v4/letter/t/df705f/32.png) [@trad](https://forum.xbench.net/u/trad)
#### Post date: [May 28, 2021, 7:08am UTC](https://forum.xbench.net/t/mqxlzs-from-memoq-9-7-10-do-not-load/799/4 "2021-05-28T07:08:44Z")

</div>

I thought I already had that one, but actually I didn’t. Now it works, thanks a lot!