# Edit segment (ctrl+E) stopped working in Studio 2021

**URL:** <https://forum.xbench.net/t/edit-segment-ctrl-e-stopped-working-in-studio-2021/750>\
**Category:** Technical Support\
**Created:** [March 11, 2021, 8:57am UTC](https://forum.xbench.net/t/edit-segment-ctrl-e-stopped-working-in-studio-2021/750 "2021-03-11T08:57:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rudi\_Sanders](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/rudi_sanders/32/54_2.png) [@Rudi\_Sanders](https://forum.xbench.net/u/Rudi_Sanders)\
**Post date:** [March 11, 2021, 8:57am UTC](https://forum.xbench.net/t/edit-segment-ctrl-e-stopped-working-in-studio-2021/750/1 "2021-03-11T08:57:07Z")

</div>

This topic is simular to the topic about Studio 2017. After the CU in Studio Ctrl+E does not open the Studio document. I have tried installing the plugin again with no result.

---

<div class="post-metadata">

**Author:** ![Rudi\_Sanders](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/rudi_sanders/32/54_2.png) [@Rudi\_Sanders](https://forum.xbench.net/u/Rudi_Sanders)\
**Post date:** [March 11, 2021, 10:58am UTC](https://forum.xbench.net/t/edit-segment-ctrl-e-stopped-working-in-studio-2021/750/2 "2021-03-11T10:58:01Z")

</div>

Strange, with an orther customer and new translation it works well. The problem occured with a Group Share job. So, it works fine at the moment.

---

<div class="post-metadata">

**Author:** ![Kaspars](https://avatars.discourse-cdn.com/v4/letter/k/57b2e6/32.png) [@Kaspars](https://forum.xbench.net/u/Kaspars)\
**Post date:** [February 3, 2022, 2:56pm UTC](https://forum.xbench.net/t/edit-segment-ctrl-e-stopped-working-in-studio-2021/750/3 "2022-02-03T14:56:03Z")

</div>

I’m having the same issue.  
Reinstalled Xbench and it’s plugin from Trados, installed the needed “bit” version (newest), but nothing changes.  
It opens the file, and then Trados either shuts’ down or doesn’t react at all.

Any suggestions?