# Checklists: not updated or new applied **URL:** \ **Category:** Technical Support\ **Created:** [May 12, 2016, 9:24am UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127 "2016-05-12T09:24:05Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Javier\_Mallo](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/javier_mallo/32/9_2.png) [@Javier\_Mallo](https://forum.xbench.net/u/Javier_Mallo)\ **Post date:** [May 12, 2016, 9:24am UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/1 "2016-05-12T09:24:05Z")
Is it normal that when I update or create a new checklist item I have to close Xbench for it to be applied in my QA? ---
**Author:** ![pcondal](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/pcondal/32/305_2.png) [@pcondal](https://forum.xbench.net/u/pcondal)\ **Post date:** [May 12, 2016, 12:31pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/2 "2016-05-12T12:31:58Z")
Which Xbench 3.0 build are you using? Which kind of checklist are you adding the term to (i.e. personal checklist or project checklist)? ---
**Author:** ![Javier\_Mallo](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/javier_mallo/32/9_2.png) [@Javier\_Mallo](https://forum.xbench.net/u/Javier_Mallo)\ **Post date:** [May 12, 2016, 12:47pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/3 "2016-05-12T12:47:12Z")
1367 64-bit. It is a Personal Checklist. ---
**Author:** ![pcondal](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/pcondal/32/305_2.png) [@pcondal](https://forum.xbench.net/u/pcondal)\ **Post date:** [May 12, 2016, 1:35pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/4 "2016-05-12T13:35:22Z")
I cannot reproduce with the same build (1367) and edition (64-bit). My exact steps are: 1. Go to **Checklist Manager**. 2. In **Checklist Manager** open checklist, right-click, then **New** , then **OK**. 3. Go to **QA** tab, ensure the personal checklist is selected and then click **Check Ongoing Translation**. After I do the above steps, QA results appear for the newly added entry. ---
**Author:** ![Javier\_Mallo](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/javier_mallo/32/9_2.png) [@Javier\_Mallo](https://forum.xbench.net/u/Javier_Mallo)\ **Post date:** [May 12, 2016, 2:23pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/5 "2016-05-12T14:23:21Z")
Yes, the checklist appears but if you Run QA just after creating a new one, issues are not detected. ---
**Author:** ![pcondal](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/pcondal/32/305_2.png) [@pcondal](https://forum.xbench.net/u/pcondal)\ **Post date:** [May 12, 2016, 2:37pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/6 "2016-05-12T14:37:37Z")
That’s strange. Are following exactly the same steps I listed above? ---
**Author:** ![Javier\_Mallo](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/javier_mallo/32/9_2.png) [@Javier\_Mallo](https://forum.xbench.net/u/Javier_Mallo)\ **Post date:** [May 12, 2016, 3:02pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/7 "2016-05-12T15:02:58Z")
Yup. It works if I fully close Xbench and open again. ---
**Author:** ![pcondal](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/pcondal/32/305_2.png) [@pcondal](https://forum.xbench.net/u/pcondal)\ **Post date:** [May 12, 2016, 3:10pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/8 "2016-05-12T15:10:14Z")
I cannot reproduce it. It seems to work fine for me (no need to restart Xbench). I tried with a checklist stored on a local disk and with a checklist stored on a network disk and both worked fine (as soon as the entry was available on the checklist, it was included in my next QA pass). ---
**Author:** ![Javier\_Mallo](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/javier_mallo/32/9_2.png) [@Javier\_Mallo](https://forum.xbench.net/u/Javier_Mallo)\ **Post date:** [May 12, 2016, 3:43pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/9 "2016-05-12T15:43:44Z")
I just double checked the whole process and it works. I think it must have been solved with the latest version (I installed it 2 days ago). Thanks! Javi ---
**Author:** ![pcondal](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.xbench.net/pcondal/32/305_2.png) [@pcondal](https://forum.xbench.net/u/pcondal)\ **Post date:** [May 12, 2016, 4:04pm UTC](https://forum.xbench.net/t/checklists-not-updated-or-new-applied/127/10 "2016-05-12T16:04:33Z")
There were a couple of checklist-related fixes in the latest build (1367). So I guess that one of the fixes also fixed this.